
Oven Not Working? Common Causes and How to Fix Them
If your oven won’t turn on at all, no lights, no display, nothing- the cause is almost always electrical rather than mechanical. Here’s how to work out what’s actually wrong before you call anyone out.
A tripped circuit breaker, a failed control board, or a blown internal fuse are the three most common reasons, and which one it is usually depends on whether the fault is in your switchboard or inside the oven itself.
This is different from an oven that turns on but won’t heat, which points to a different set of causes. If your oven powers on normally but the inside stays cold, see our guide on ovens not heating instead.
Why did my oven stop working?
An oven needs three things to run: mains power reaching it, an internal control board directing that power, and the clock or timer set correctly (on most modern ovens, the display has to be active before any cooking function will start). If any one of these breaks down, the oven can appear completely dead even though nothing looks visibly wrong.
Call a Local Appliance Tech Now
Same Day Repair* and 12 Month Parts Warranty - All Brands, Affordable Prices
Click To Call: 1300 652 100The starting point is always the same regardless of brand: work out whether the problem is with your home’s power supply or inside the oven. The circuit breaker check below takes less than a minute and rules out the most common cause first.
Check the circuit breaker first
Go to your switchboard and look for a breaker labelled for the oven or kitchen circuit. If it has tripped, it will usually sit in a middle position rather than fully up or down. Switch it fully off, then back on.
If the breaker trips again immediately, do not keep resetting it. A breaker that won’t stay on is protecting you from a genuine fault, either in the oven or in the wiring, and repeated resetting risks damage or fire. The NSW Government’s guidance on safety switches notes that around 40% of house fires in the state each year are linked to electrical faults and appliances — which is exactly the risk a tripping breaker is designed to prevent.
Also check that your other kitchen appliances still have power. If the whole kitchen is out but the rest of the house is fine, the fault is more likely in the circuit than the oven itself.
Why does my oven keep tripping the power?
An oven that trips the breaker every time it’s switched on usually has a short circuit somewhere in its wiring or in the heating element. Water ingress from spills or a heavy clean, a damaged element, or a failing control board can all cause current to leak to earth, which is exactly what a safety switch is designed to detect and shut down.
Call a Local Appliance Tech Now
Same Day Repair* and 12 Month Parts Warranty - All Brands, Affordable Prices
Click To Call: 1300 652 100Bosch’s own troubleshooting guidance for ovens that won’t switch on recommends checking the power connection and circuit breaker first, then ruling out simple causes like an activated child lock before assuming a fault. If the breaker trips only with the oven connected and stays on with the oven disconnected, the fault is inside the appliance and it needs a technician and not a repeated resets.
My oven stopped working after a power outage. What should I do?
After a power outage, check your switchboard before assuming the oven itself has failed. The NSW Government’s guidance on power outages recommends unplugging or switching off sensitive appliances during an outage and checking your circuit breakers and safety switches once power returns, since uneven voltage on restoration can trip them.
Many ovens also need their clock reset before any cooking function will work. Westinghouse ovens in particular are known for showing a flashing “0:00” or similar after a power interruption, and the oven will not start until the time is set again. If the display is blank instead of flashing, and the breaker has not tripped, the fault is more likely a blown internal fuse than the outage itself.
What are the signs of a failed control board?
The control board manages every function in the oven, so when it fails, the symptoms are often inconsistent rather than a single clear fault. Common signs include a display that lights up but does not respond to any button, some functions working while others do nothing, or the oven losing power intermittently during a cook.

Smeg ovens display specific error codes that point directly to a board or lock fault, including “ERR4” for a door lock issue and “PO” when the power limiter setting is simply switched on. If your Smeg shows a code instead of a blank screen, check it against your manual before assuming the board has failed, since some of these codes reflect a setting, not a genuine fault.
Do electric and gas ovens fail differently?
Electric ovens that won’t turn on almost always point to the control board, the wiring, or a tripped breaker, since every function depends on mains power reaching the internal circuitry. There is no secondary system to fall back on if the electrics fail.
Gas ovens still rely on mains power for the display, clock, and in most modern models, an electronic ignition module that sparks the burner. This means a gas oven with no power behaves exactly like an electric one, dead display, no response, and the fault is still electrical rather than something to do with your gas supply. ILVE gas ovens, for example, use an electronic spark module that requires power to ignite, so a completely unresponsive ILVE gas oven should be diagnosed the same way as an electric one instead of assuming a gas supply issue.
Can I reset my oven?
Yes, and it’s worth trying before anything else. Turn the oven off at the wall or switchboard, wait around two minutes for the internal capacitors to discharge, then restore power and set the clock if prompted. This resolves a surprising number of “dead” ovens, particularly after a power outage or a brief surge.
Chef ovens, part of the Electrolux Australia family alongside Westinghouse, share similar internal fuse and control board designs, so the same reset process applies across both brands. If a reset doesn’t bring the display back, or it comes back and then cuts out again, the fault is inside the appliance and a reset won’t fix it permanently.
When to call a technician
If you’ve checked the breaker, ruled out a power outage, and tried a full reset with no luck, it’s time to get a technician to look at it instead of continuing to test components yourself. Opening up the control panel or testing internal wiring involves mains electricity, and this work should always be left to a licensed technician, not attempted at home.
Nationwide Appliance Repairs repairs ovens from all major brands, including Westinghouse, Smeg, Bosch, ILVE and Chef, and most repairs are fully completed during the initial appointment, saving you time and hassle. Our technicians are in-house, not subcontracted, and every repair is backed by a 12-month parts and 3-month labour warranty. If your oven is still dead after trying the steps above, call us on 1300 652 100 now to book a technician.

Frequently asked questions
Is it safe to keep resetting the breaker if my oven keeps tripping it?
No. A breaker that trips repeatedly is doing its job by cutting power to a fault, and resetting it over and over does not fix the underlying problem. It can also be a fire risk if the fault is a short circuit inside the oven. Leave the breaker off and book a technician instead.
How much does it cost to repair an oven that won’t turn on?
It depends on the cause. A blown internal fuse is usually a low-cost fix, while a replacement control board costs more due to the price of the part. A technician can give you an accurate quote once the fault is diagnosed, since “not working” can mean several different things internally.
Should I unplug my oven if it’s not working?
If the oven is tripping the breaker or showing signs of an electrical fault, such as burning smells or scorch marks near the plug, switch it off at the wall and don’t use it again until it’s been checked. If it’s simply not turning on with no other symptoms, leaving it plugged in while you troubleshoot is fine.
Is it worth repairing an old oven that’s completely dead, or should I replace it?
This depends on the age of the oven and what’s actually failed. A blown fuse or a straightforward board repair is usually well worth doing on an oven that’s otherwise in good condition. If the oven is already past 12 to 15 years old and multiple components are failing, a technician can help you weigh up repair cost against the price of a new unit.
Related articles
Call a Local Appliance Tech Now
Same Day Repair* and 12 Month Parts Warranty - All Brands, Affordable Prices
Click To Call: 1300 652 100
